Paint Calculator

Project measurements

Example values are editable. Check dimensions and product labels before ordering.

count
%
USD
Additional rectangular sections

Add each separate rectangular area once. Enter any exclusions and allowance for the combined estimate.

Price basis: per US gallon, or per container when a size is entered. A blank optional quantity can be entered as 0.

Material estimate

Net area
37.161 m²
Net area
400 ft²
Paint required
7.571 L
Paint required
2 US gal

Calculation trace

37.161216 m² × 2 coats ÷ 9.816954699 m²/L × 1

Assumptions

  • Allowance explicitly selected: 0%.

The paint calculator multiplies net wall area by the number of coats and divides by the paint label’s coverage. Use wall width and height, deduct openings, and add any other measured wall sections. The gallons result stays fractional unless you choose to round to whole containers of a specified size.

Work out how much wall paint you need from net wall area, coat count and labeled coverage. Estimate US gallons, liters and optional whole paint containers. For related examples and tools, see How Much Paint Do I Need for Walls?, How to Calculate Square Footage of a Room, How to Read Concrete Yield and Material Coverage Labels, Wallpaper Roll Calculator, Flooring Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.

How do you use this calculator?

  1. Measure the combined wall width and height. Deduct the actual openings you plan to leave unpainted.
  2. Enter coats and label coverage for that surface. Use the container size if you need a whole-can count.
  3. Each paint color or product needs its own result and container order.

What should you enter?

Wall perimeter / combined wall width
Primary length of the measured surface or run. Measure the combined wall width and height. Deduct the actual openings you plan to leave unpainted.
Wall height
Vertical dimension of the wall or face. Measure from the paint boundary above the baseboard to the upper paint line.
Door and window area
Area to leave uncovered. Measure each opening or exclusion, add the areas and deduct them once.
Number of coats
Number of coats of the same paint. Use the planned coats for that product and keep a different primer or coating separate.
Product coverage per US gallon
Usable area covered by one package or by one liquid unit for paint. Match the selected coverage unit and use the exact product label.
Container size (optional)
Optional volume in one purchasable container. Check the actual size available and choose the matching unit.
Waste / allowance
The percentage you choose to add for ordering. Compare container combinations against the liquid volume before opening another can.
Material price per purchase unit (USD)
Optional price in USD per US gallon, or container when a size is entered. Use the quoted unit price before fees and taxes.

How is the estimate calculated?

Net area = main wall width × height + sum of extra wall section areas − exclusions. Liquid volume = net area × coats ÷ entered coverage × (1 + allowance / 100). Whole containers = ceil(liquid volume / container volume) if entered.

Paint = net wall area × coats × (1 + allowance ÷ 100) ÷ coverage per gallon. Containers = ceil(paint gallons ÷ container gallons) if supplied.

  • Coverage is measured per coat for one product.

What wall measurements does the paint calculator need?

Start with the walls you will paint. A floor’s square footage does not capture wall height, doors or windows. For side walls in an open room, record each run separately. For a vaulted wall, split the shape into areas on paper before deciding how to enter or estimate it.

How many gallons do two paint jobs need?

Rectangular room

  • 12 × 14 ft, 8 ft walls
  • 20 sq ft door and two 15 sq ft windows as measured examples
  • 2 coats, 390 sq ft per gallon, no allowance
  1. Perimeter = 2 × (12 + 14) = 52 ft.
  2. Wall area = 52 × 8 = 416 sq ft.
  3. Deduct 20 + 15 + 15 = 50 sq ft for a net 366.
  4. 366 × 2 ÷ 390 ≈ 1.877 gal.

2 whole 1-gallon cans at the chosen size.

Check. 2 × 390 ÷ 2 coats = 390 sq ft of two-coat coverage.

Small bedroom

  • 10 × 10 ft, 8 ft walls
  • 20 sq ft deduction, 2 coats, 375 sq ft per gallon, 5% allowance
  1. 2 × (10 + 10) × 8 = 320 sq ft.
  2. 320 − 20 = 300 sq ft.
  3. 300 × 2 × 1.05 ÷ 375 = 1.68 gal.

2 whole 1-gallon cans at the chosen size.

Check. 1.68 × 375 = 630 sq ft of coat coverage.

How do coats and label coverage affect gallons?

Coverage examples before any allowance
Label coverage per gallonTwo-coat wall coverage per gallon
350 sq ft175 sq ft
375 sq ft187.5 sq ft
400 sq ft200 sq ft

Use the combined wall width and height, or add measured wall sections. Subtract the area of doors, windows or other unpainted surfaces as appropriate. A room's floor square footage alone is not the wall area that the paint needs to cover.

When should you combine cans or allow more paint?

Use the label for the coating and surface you intend to paint. Color changes and porosity can affect the coats needed, and the manufacturer may call for primer. Keep primer, ceiling paint and trim paint on separate order lines if they are different products. Confirm the needed coats and coverage for each.

Multiply the net surface area by the number of coats, then divide by the coverage per gallon or liter. Use coverage from the exact paint label. Surface texture, porosity, application and color changes may affect actual use; an example coverage is not a guarantee for every paint.

Why can real paint coverage differ from the label?

Compare container sizes by total usable coverage and price. Divide the required amount by the chosen container size and round up, then price the whole containers. If you switch to a different product, recheck its rate and any coat change before carrying over the original volume.

Check coats and can sizes

  • Confirm coverage per coat for the exact coating and surface.
  • Compare container combinations against the liquid volume before opening another can.

Frequently asked questions

Should I measure window and door openings?

Measure the openings you will leave unpainted and deduct their areas. For a rough early estimate, use your own reasonable dimensions and replace them with actual measurements before buying. Paintable trim or a door of a different color should have a separate order.

How do I estimate a ceiling or trim?

Measure its own surface area and use its own coating coverage and coat count. Keep the result separate from contrasting wall paint when those are different products. A ceiling’s dimensions may match floor area only when the treated surfaces have matching flat footprints.

Does a color change always need another coat?

Follow the product guidance and assess the actual surface and color change. The calculator multiplies by the coats you enter. It does not infer hiding performance or primer requirements from the color name. Keep any primer estimate separate if it uses a different product.

Why are gallons and cans different numbers?

Gallons describe the calculated liquid volume. Cans describe a purchase after rounding up to the selected container size. Compare available sizes and total price before buying. Use the same units for the estimated volume and the container volume.

How much paint do I need for two coats?

Multiply the net painted area by two and divide by your selected product's coverage for one coat. Add your chosen allowance and round to whole containers if you enter a container size.

Does one gallon of paint cover every room?

No. Wall area, the number of coats, product coverage and surface conditions all matter. This calculator uses the measurements and coverage you enter rather than a fixed rooms-per-gallon rule.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction