Use the footing concrete calculator once your project specifies the dimensions. Choose a rectangular run or a round pier, multiply one footing’s volume by the count of identical footings, and apply an allowance. Calculate different sizes separately so one repeated count does not hide a change in width or depth.
Estimate concrete for rectangular or round footings from their dimensions and quantity. This footing calculator totals volume; it does not size foundations. For related examples and tools, see Cubic Feet to Cubic Yards: Material Volume Conversion, How to Calculate Concrete for a Slab, Concrete Bag Calculator, Fence Post Concrete Calculator, Concrete Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.
How do you use this calculator?
- Select the footing cross-section shown in your project plans. For a round pier, enter diameter and depth.
- Count identical footings and enter the count with those dimensions. Calculate a different run or diameter in a separate pass.
- Compare the total with the concrete needed for each scheduled pour.
What should you enter?
- Footing length
- Primary length of the measured surface or run. Select the footing cross-section shown in your project plans. For a round pier, enter diameter and depth.
- Footing width / circular diameter
- Width of the rectangle, or diameter when you select the round option. Measure across the center of the round area or straight across the rectangle.
- Depth
- Thickness or depth of the measured material. Measure only the layer being estimated and confirm the unit before entering.
- Number of footings
- Number of identical units. Make a separate entry for each distinct size.
- Waste / allowance
- The percentage you choose to add for ordering. Group identical footings only if they belong in the same order.
- Material price per purchase unit (USD)
- Optional price in USD per cubic yard of footing concrete. Use the quoted unit price before fees and taxes.
How is the estimate calculated?
Rectangle: length × width × depth × count. Circle: pi × (diameter ÷ 2) squared × depth × count. Apply the user-entered allowance to this total.
Rectangle: length × width × depth × count. Circle: pi × (diameter ÷ 2) squared × depth × count.
- Every footing counted in one estimate has the same dimensions.
What shapes does the footing concrete calculator use?
The useful distinction is shape. A continuous rectangular footing uses its run length times the plan’s width times its depth. A round tube uses its internal diameter and filled height. A tapered, stepped or belled footing can require more than one volume calculation. Write the shapes on the estimate so you know what each number covers.
How much concrete goes in a straight run or round pier?
Continuous rectangular run
- 20 ft long, 12 in wide, 12 in deep
- One run with 5% allowance
- 12 ÷ 12 = 1 ft for width and depth.
- 20 × 1 × 1 = 20 cu ft.
- 20 × 1.05 = 21 cu ft.
- 21 ÷ 27 ≈ 0.778 cu yd.
Use 21 cu ft as the adjusted order target.
Check. 21 ÷ 1.05 = 20 cu ft.
Round pier
- 16 in internal diameter, 42 in filled height
- One pier, zero allowance
- 16 ÷ 2 ÷ 12 = ⅔ ft radius.
- 42 ÷ 12 = 3.5 ft height.
- π × (⅔)² × 3.5 ≈ 4.887 cu ft.
- 4.887 ÷ 27 ≈ 0.181 cu yd.
Approximately 4.887 cu ft per measured pier.
Check. Multiplying the circular area of about 1.396 sq ft by 3.5 ft gives about 4.887 cu ft.
How does the footing size change volume per foot?
| Cross section | Volume for 1 ft |
|---|---|
| 12 × 12 in rectangle | 1 cu ft |
| 16 in circle | about 1.396 cu ft |
| 24 in circle | about 3.142 cu ft |
Use the rectangular option for a measured rectangular footing, or the circular option for a cylindrical footing. Multiply the volume of one identical footing by its quantity. Calculate different footing sizes separately so a repeated count does not hide changes in dimensions.
Which footings can you count as a group?
Measure the planned concrete rather than relying on the excavation label. A single long footing changes volume whenever its cross section changes. Two round piers of different diameter cannot share an input count. Keep separate lines on the purchase sheet, then combine volume only for concrete that can be ordered together.
The dimensions must come from the appropriate project design. Soil conditions, bearing loads, frost requirements and reinforcement are not determined by a volume calculator. Once the volume is known, use the bag calculator if the concrete will be mixed from bags.
Should separate concrete pours use separate estimates?
Check whether the crew and supplier intend separate pours. Transferring combined volume into bags or a delivery quote can hide handling and scheduling limits. Confirm clear access and compare the actual material count and transport. Ask a qualified professional about footing dimensions or code and call 811 before digging.
Check footing shapes and counts
- Confirm dimensions against the approved project information before ordering.
- Group identical footings only if they belong in the same order.
Frequently asked questions
Do I enter the radius or diameter of a pier?
Enter the diameter for the round shape. The calculation halves it to find the radius. Use the internal diameter of the form or the actual concrete dimensions given in your plan. Entering the radius in its place gives one quarter of the intended circular area.
Can I combine different pier diameters in one count?
Calculate different pier sizes separately. The count multiplies the volume of identical footings. If your drawing has several groups, record each diameter, depth and count, then add the group volumes together only when they will use the same mix and ordering arrangement.
Does a footing estimate include a slab above it?
The footing estimate covers the dimensions entered. Calculate an adjoining slab separately and check the boundary between them so the same space is counted once. For connecting shapes, use the concrete extent shown on the project plan before adding volumes.
What if a footing widens along the run?
Split a stepped run into separate measured shapes. Add the volumes before applying an order allowance. A continuous taper needs its actual cross section, which may not match either end for the whole length. Ask for clarification when the plan is unclear.
How do I calculate concrete for a round footing?
Calculate the circular area as pi times the radius squared, multiply by depth, then multiply by the number of identical footings. Use diameter and depth in compatible units.
Will this calculator tell me how deep a footing should be?
No. It estimates concrete from dimensions you supply. A qualified designer or the relevant project requirements must establish the footing dimensions.
Sources and editorial details
CubicPilot Editorial Team. Last content review .
- General tables of units of measurement (NIST). Reference for US customary lengths, areas and volumes.
- Before You Dig (Common Ground Alliance). Explains US utility marking and how to contact 811.