Topsoil Calculator

Project measurements

Example values are editable. Check dimensions and product labels before ordering.

%
USD
Additional rectangular sections

Add a rectangle only where it does not overlap a measured section. Enter the depth for that section.

Price basis: per cubic yard. A blank optional quantity can be entered as 0.

Material estimate

Net area
18.581 m²
Net area
200 ft²
Measured volume
1.416 m³
Measured volume
50 ft³
Measured volume
1.852 yd³

Calculation trace

1.41584233 m³ × 1 = 1.41584233 m³

Assumptions

  • Allowance explicitly selected: 0%.

The topsoil calculator estimates how much new soil fills a measured area to a depth you enter. Multiply area by depth and convert to cubic yards for bulk ordering. Add a settling allowance only if you intend one, and enter supplier bulk density if you also need an approximate delivery weight.

Estimate how much topsoil you need from the covered area and soil depth. Calculate volume first; add supplier density only when you need a weight estimate. For related examples and tools, see Cubic Feet to Cubic Yards: Material Volume Conversion, How Much Mulch Do I Need? Cubic Yards and Bags, Mulch Calculator, Landscape Rock Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.

How do you use this calculator?

  1. Split the site into nonoverlapping rectangles and enter a representative added depth for each.
  2. Enter the seller’s bulk density if you need to estimate delivery weight.
  3. Check whether the seller quotes loose or settled volume before adding any allowance.

What should you enter?

Length
Primary length of the measured surface or run. Split the site into nonoverlapping rectangles and enter a representative added depth for each.
Width
Distance across the measured area. Measure across the surface at right angles to its length. Split sections where the width changes.
Added depth
Thickness or depth of the measured material. Measure only the layer being estimated and confirm the unit before entering.
Supplier density (optional)
Optional bulk density in the selected weight per volume unit. Ask the seller for the selected material in the condition relevant to the estimate.
Waste / allowance
The percentage you choose to add for ordering. Confirm the truck minimum and where the soil can be unloaded.
Material price per purchase unit (USD)
Optional price in USD per cubic yard of topsoil. Use the quoted unit price before fees and taxes.

How is the estimate calculated?

Added soil volume = area × depth. Apply the selected settling allowance. Optional weight = adjusted volume × supplier density. Add each extra rectangular section’s area × its depth to the base volume before applying the allowance.

Added soil volume = area × depth. Apply the selected settling allowance. Optional weight = adjusted volume × supplier density.

  • The volume represents the desired added soil layer plus the entered allowance.

How do you measure an area for the topsoil calculator?

For a raised bed, measure the inside footprint and the gap between the existing surface and the desired fill level. On a lawn, map each shallow patch independently. The whole lawn area only belongs in the estimate if you are actually treating the entire area to the entered depth.

How much topsoil do two different fills need?

Rectangular raised bed

  • 4 × 8 ft inside, 12 in of new material
  • Example 10% allowance
  1. 4 × 8 = 32 sq ft.
  2. 12 ÷ 12 = 1 ft.
  3. 32 × 1 = 32 cu ft.
  4. 32 × 1.10 = 35.2 cu ft.
  5. 35.2 ÷ 27 ≈ 1.304 cu yd.

Quote at least 35.2 cu ft, rounded to the seller’s actual unit.

Check. 35.2 ÷ 1.10 = 32 cu ft.

Lawn topsoil layer

  • 1,000 sq ft, 2 in of measured fill
  • Zero allowance
  1. 2 ÷ 12 = ⅙ ft.
  2. 1,000 × ⅙ = 166⅔ cu ft.
  3. 166⅔ ÷ 27 ≈ 6.173 cu yd.

The geometry calls for about 6.173 cu yd before seller rounding.

Check. 166⅔ ÷ 1,000 × 12 = 2 in.

How much area does a cubic yard of topsoil cover?

Volume for a 100 sq ft footprint
Added depthCubic feet
1 in8⅓
2 in16⅔
4 in33⅓

Measure the length and width of each covered section and the intended depth of the added soil. Keep the calculation separate from existing ground volume. Different depths need separate sections; square footage alone cannot determine a topsoil order.

Should you compare bagged soil with a delivery quote?

Ask the seller about minimum volume, unloading access and the condition used for any quoted weight. Wet material can weigh more than the dry example on a bag. For bulky orders, use measured volume to size the layer and supplier weight to plan transport independently. Price the rounded purchase, including delivery or trip costs.

Loose delivered soil can settle after placement. The allowance is your explicit purchasing adjustment, not a universal settlement factor. Bulk density also depends on the material and condition. Confirm the topsoil specification, ordering unit and any settlement adjustment with the supplier.

How do uneven grade and settling affect the estimate?

Keep container potting mix, fill and topsoil as separate buying lines when they are different products. Choose a depth for your project from the plan or appropriate growing guidance. An example depth is a calculation input. The estimate cannot determine soil composition or guarantee how much a specific product settles.

Check fill depth and delivery

  • Record deep spots separately so they do not inflate the estimate for the whole lawn.
  • Confirm the truck minimum and where the soil can be unloaded.

Frequently asked questions

Can I use the outside width of a raised bed?

Measure the inside width and length where the soil will sit. Outside dimensions can include boards or edging. Measure the height you want to add above the existing surface, then calculate that fill volume separately from any existing soil or other material.

What if a lawn needs soil only in patches?

Sketch the treated patches and measure each one. Separate areas that require different depths before adding their volumes. Multiplying the whole lawn by the deepest patch would overstate the order and would not tell you where the extra material actually belongs.

Does a settling allowance also change weight?

The optional weight estimates the adjusted volume times the supplied bulk density. Check the density and condition with your supplier. If your allowance is already included in a supplied order volume, avoid applying it again before calculating the approximate transport weight.

Should I order topsoil in bags or by the yard?

Compare the volume needed with package coverage or a bulk quote. For bags, divide cubic feet by labeled cubic feet per bag and round up. For bulk, ask about increments and minimums. Compare delivered totals and how you will move and unload the material.

How do I calculate cubic yards of topsoil?

Multiply area in square feet by depth in feet, then divide by 27. If depth is in inches, divide it by 12 before multiplying.

Can I use this as a soil weight calculator?

Yes, as an estimate when you supply a compatible bulk density. Soil volume by itself does not establish weight, and a delivery scale may give a different actual mass.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction