Landscape Rock Calculator

Project measurements

Example values are editable. Check dimensions and product labels before ordering.

%
USD
Additional rectangular sections

Add a rectangle only where it does not overlap a measured section. Enter the depth for that section.

Price basis: per cubic yard. A blank optional quantity can be entered as 0.

Material estimate

Net area
9.29 m²
Net area
100 ft²
Measured volume
0.472 m³
Measured volume
16.667 ft³
Measured volume
0.617 yd³

Calculation trace

0.4719474432 m³ × 1 = 0.4719474432 m³

Assumptions

  • Allowance explicitly selected: 0%.

Use the landscape rock calculator for a measured layer of decorative stone or river rock. Enter a rectangular or circular footprint and its depth. The tool estimates cubic yards, with an optional mass estimate from supplier bulk density. Confirm the actual rock size and layer coverage before you order.

Calculate landscape rock volume for a measured area and depth. Estimate river rock or decorative stone coverage, with optional weight from supplier bulk density. For related examples and tools, see Cubic Yards to Tons: Gravel and Rock Bulk Density, Cubic Feet to Cubic Yards: Material Volume Conversion, Gravel Calculator, Mulch Calculator, Paver Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.

How do you use this calculator?

  1. Select the bed shape, then measure the area and the depth of the rock layer.
  2. Enter bulk density for the exact rock product if your supplier sells by weight.
  3. Check the vendor’s unit before comparing stone sizes and delivery charges.

What should you enter?

Area length
Primary length of the measured surface or run. Select the bed shape, then measure the area and the depth of the rock layer.
Area width / circular diameter
Width of the rectangle, or diameter when you select the round option. Measure across the center of the round area or straight across the rectangle.
Rock depth
Thickness or depth of the measured material. Measure only the layer being estimated and confirm the unit before entering.
Supplier density (required for weight)
Optional bulk density in the selected weight per volume unit. Use the seller’s bulk density for this stone size, including the voids among pieces.
Waste / allowance
The percentage you choose to add for ordering. Use the seller’s rock size when deciding how much coverage the selected depth gives.
Material price per purchase unit (USD)
Optional price in USD per cubic yard of landscape rock. Use the quoted unit price before fees and taxes.

How is the estimate calculated?

Rock volume = area × depth. Apply your selected allowance. Optional mass = adjusted volume × supplier density. A US short ton is 907.18474 kg. Add each extra rectangular section’s area × its depth to the base volume before applying the allowance.

Rock volume = area × depth. Apply your selected allowance. Optional mass = adjusted volume × supplier density. A US short ton is 907.18474 kg.

  • Bulk density is for a quantity of rock that includes the air between pieces.

What does the landscape rock calculator need for weight?

A decorative strip, a round bed and a driveway base are separate jobs. The cover material may have different grading and voids. Use the aggregate product meant for the surface you are estimating. A supplier coverage chart can tell you the depth at which its figures were calculated. Compare that depth with the one in your plan.

How much rock goes into two example beds?

Decorative bed

  • 100 sq ft, 2 in deep
  • Zero allowance, illustrative 96 lb per cu ft
  1. 100 × 2 ÷ 12 = 16⅔ cu ft.
  2. 16⅔ ÷ 27 ≈ 0.617 cu yd.
  3. 16⅔ × 96 = 1,600 lb.
  4. 1,600 ÷ 2,000 = 0.80 US ton.

About 0.617 cu yd or 0.80 US ton at the example density.

Check. 0.80 × 2,000 ÷ 96 = 16⅔ cu ft.

Round bed

  • 8 ft diameter, 3 in deep
  • Zero allowance
  1. Radius = 4 ft.
  2. Area = π × 4² ≈ 50.265 sq ft.
  3. Depth = ¼ ft.
  4. Volume ≈ 12.566 cu ft or 0.465 cu yd.

Confirm seller rounding for an order that covers about 0.465 cu yd.

Check. 12.566 ÷ 50.265 × 12 ≈ 3 in.

How does layer depth change rock coverage?

Volume coverage before allowance
DepthArea covered by 1 cu yd
2 in162 sq ft
3 in108 sq ft
4 in81 sq ft

The area and chosen layer depth determine geometric volume. Rock size, grading and the way pieces settle affect how a layer looks and fills. Use the actual product's coverage guidance when choosing a depth; the calculator does not prescribe a suitable drainage or landscape design.

Should you buy rock by volume or weight?

Weight depends on bulk density, including the space between pieces in a delivery. Solid rock density is a different value. Ask the seller which weight per cubic yard it uses for the actual load and whether moisture changes the estimate. Compare rock sold by the ton with rock sold by yard using that stated condition.

A bulk delivery contains spaces between pieces. Solid rock density ignores those spaces and can give an unsuitable tonnage conversion. Ask for a bulk density matched to the product and its delivery condition before using the optional weight estimate.

Why can two rock products weigh different amounts?

Record distinct bed shapes and add rectangular sections separately. Use the full diameter for a circle before finding radius. Check whether the delivery can get close enough to unload. For a self-haul order, ask the supplier for load weight and compare it with your vehicle’s payload. Call 811 before digging.

Check stone depth and quoted weight

  • Ask for bulk density that accounts for gaps between pieces.
  • Use the seller’s rock size when deciding how much coverage the selected depth gives.

Frequently asked questions

Can I use the diameter as a radius?

Enter the full diameter if the calculator requests it. The circular area uses half that value as radius. Measuring from center to edge gives radius, so double that measurement before entering it. An error here changes the area and purchase quantity substantially.

Why does rock type change the weight estimate?

Different stone sizes, grading and moisture conditions can change the bulk weight that fits in a cubic yard. Ask the supplier for a value for the selected product. Use that value for a weight estimate rather than transferring it from unrelated gravel or another rock order.

Does a rock coverage chart apply at every depth?

Check the depth that accompanies the coverage statement. A fixed volume covers less area at a greater depth. You can use volume divided by depth in consistent units to compare coverage, but confirm the product itself suits the layer and the planned appearance.

How do I plan a self-haul stone order?

Ask the supplier for the actual load weight and compare it with your vehicle’s payload. Split the trip count if needed or ask for a delivered quote. Calculate pickup and delivery costs on the same measured order, including any minimum purchase or unloading charge.

How much landscape rock do I need?

Multiply the covered area by the intended depth. Convert to the supplier's volume unit, then apply an allowance if you choose one. Verify coverage against the product's rock size and instructions.

Is river rock tonnage the same as gravel tonnage?

Not automatically. Different products and conditions can have different bulk densities. Use a supplier value for the particular material instead of transferring a conversion from another calculator example.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction