Paver Calculator

Project measurements

Example values are editable. Check dimensions and product labels before ordering.

count
%
USD

Price basis: per piece, or per box when entered. A blank optional quantity can be entered as 0.

Material estimate

Net area
9.29 m²
Net area
100 ft²
Nominal piece estimate
100 pieces
Whole purchase pieces
100 pieces

Calculation trace

9.290304 m² ÷ 0.09290304 m² per module × 1

Assumptions

  • Allowance explicitly selected: 0%.

A paver calculator estimates how many surface pieces cover a patio or path. Enter net area, actual paver dimensions, and joint width. Add your chosen cutting allowance and round up to whole pieces. If the seller lists a box quantity, enter it to see the corresponding number of whole boxes.

Estimate how many pavers you need for a patio or walkway from its area, actual paver dimensions and joints. Add a cutting allowance and optional box quantity. For related examples and tools, see How Many Pavers Do I Need for a Patio?, How Much Gravel Do I Need for a Driveway?, Gravel Calculator, Brick Calculator, Landscape Rock Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.

How do you use this calculator?

  1. Measure the area inside the patio edges and deduct areas where pavers will not go.
  2. Enter the paver face size and planned joint width. Use the actual pieces per box if it comes in cases.
  3. Check your pattern for edge cuts and order separately for base, bedding and edging.

What should you enter?

Patio length
Primary length of the measured surface or run. Measure the area inside the patio edges and deduct areas where pavers will not go.
Patio width
Distance across the measured area. Measure across the surface at right angles to its length. Split sections where the width changes.
Excluded area
Area to leave uncovered. Subtract planters and other areas inside the patio boundary where no pavers will go.
Paver length
Actual visible face length of one piece. Measure in the orientation you will lay it.
Paver width
Actual exposed second face dimension. Measure the face that will contribute to the surface, not material thickness.
Joint width
Clear joint width between adjacent pieces. Use the selected layout or manufacturer’s stated joint and avoid double-counting nominal spacing.
Pavers per box (optional)
Whole pieces in one box or pack. Read the count for the exact size and SKU.
Waste / allowance
The percentage you choose to add for ordering. Confirm the pieces in each box before pricing the rounded order.
Material price per purchase unit (USD)
Optional price in USD per piece, or box when package count is entered. Check whether the store price covers one paver or a whole box.

How is the estimate calculated?

Module area = (paver length + joint) × (paver width + joint). Divide net patio area by module area, apply allowance and round up for pieces. Divide pieces by pieces per box and round up again for boxes.

Module area = (paver length + joint) × (paver width + joint). Divide net patio area by module area, apply allowance and round up for pieces. Divide pieces by pieces per box and round up again for boxes.

  • Coverage uses one repeat of the paver face and its share of the joints.

What measurements does the paver calculator need?

Start from the top surface area. A single-size slab uses one repeating module including the joints. A border running in a different direction can need its own line. If the product is sold in a multi-size pattern pack, ask for its usable coverage per pack and the pattern information before translating this piece estimate into an order.

How many pavers do two different layouts need?

Square patio

  • 10 × 10 ft, 6 × 6 in pavers
  • Zero joint in arithmetic example, 5% allowance, 20 per box
  1. 100 × 144 = 14,400 sq in.
  2. Module = 6 × 6 = 36 sq in.
  3. 14,400 ÷ 36 × 1.05 = 420 pieces.
  4. 420 ÷ 20 = 21 boxes.

420 pieces or 21 boxes.

Check. 21 × 20 = 420 pieces.

Longer patio

  • 12 × 16 ft, 4 × 8 in pavers
  • 0.125 in joints, 10% allowance
  1. 12 × 16 × 144 = 27,648 sq in.
  2. Module = 4.125 × 8.125 = 33.515625 sq in.
  3. 27,648 × 1.10 ÷ 33.515625 ≈ 907.422.

Round up to 908 pieces.

Check. 907 modules cover less than the adjusted area of 30,412.8 sq in.

How do joint width and paver size change coverage?

Illustrative coverage without joints or allowance
Face sizePieces per sq ft
6 × 6 in4
4 × 8 in4.5
12 × 12 in1

Measure the paved area, subtract excluded sections and enter the face dimensions of one paver. The joint width changes the area covered by each repeating module. A count based on one rectangular piece is a starting estimate, not a cutting plan for a mixed-size pattern.

When should you add pavers for cuts or buy another box?

Base gravel, bedding sand and edging belong on separate lines. Use the specified area and depth of each layer. An edge can extend beyond the visible paver footprint, so the base area may differ. Ask the supplier for the actual weight or volume of each product and check whether separate minimums apply.

This tool counts surface pavers and optional boxes. Base aggregate, bedding sand, edging and drainage are separate materials. Use the gravel calculator for a measured aggregate layer and confirm the required build-up with the applicable installation guidance.

Which materials must you estimate separately?

When drawing the work, mark where full pieces stop. Running bond and herringbone can produce different cuts at the same boundary. Choose an allowance for the actual pattern. Check the product and local requirements, use appropriate silica dust controls if cutting, and call 811 before digging in the US.

Check the paver pattern and case count

  • Compare the calculated count with a row layout along two adjoining edges.
  • Confirm the pieces in each box before pricing the rounded order.

Frequently asked questions

What size should I enter for a paver?

Measure the actual face dimensions and read the product layout instructions. If a listed nominal size already includes spacing, adding another joint may exaggerate the module. Use the actual piece and its intended joint where the calculator requests both values.

Can I use the count for a mixed pattern pack?

Use the product’s pack coverage for a mixed-size set. This calculator estimates a repeating module of one size. A multi-size kit may have a fixed proportion of parts, so check the pack’s usable coverage and the supplier pattern before placing the order.

How much base gravel and bedding sand do I buy?

Calculate each layer separately once its specified dimensions and depth are known. Surface pieces do not establish either of those layer quantities. Measure the base footprint independently, use the actual aggregate or bedding product, and confirm its sales unit and delivery requirements.

Should I round to pieces, boxes or pallets?

Round to whole pieces first. If the product is sold only by a full package, divide the piece count by pieces per package and round up. Confirm whether the seller breaks packages, and compare total loads with your vehicle payload or delivery plan.

How do I calculate pavers per square foot?

Divide one square foot by the area of a paver-and-joint module expressed in square feet. For a whole project, calculate the net area first and round the final purchase quantity up.

Does this include sand or paver base?

No. The outputs cover paver pieces and optional boxes. Calculate base and bedding layers separately using their own area, depth and material requirements.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction