Use the gravel calculator to measure a path, driveway or base layer from its area and finished depth. The volume result is in cubic yards. Enter the supplier’s bulk density to estimate US short tons. Run separate estimates for different layers or rock grades so the truck order uses the correct material.
Estimate gravel driveway volume from length, width and finished depth. Use supplier bulk density when you also need an approximate gravel tonnage. For related examples and tools, see How Much Gravel Do I Need for a Driveway?, Cubic Yards to Tons: Gravel and Rock Bulk Density, Cubic Feet to Cubic Yards: Material Volume Conversion, Landscape Rock Calculator, Paver Calculator, Concrete Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.
How do you use this calculator?
- Measure the driveway length and width for one gravel layer. Enter the finished depth of that layer.
- Add each nonoverlapping driveway section at its own depth. Run separate estimates for base gravel and surface gravel.
- Enter the supplier’s bulk density if the quote is by weight. Compare your tonnage with the seller’s delivery units and minimum.
What should you enter?
- Driveway length
- Primary length of the measured surface or run. Measure the driveway length and width for one gravel layer. Enter the finished depth of that layer.
- Driveway width
- Distance across the measured area. Measure across the surface at right angles to its length. Split sections where the width changes.
- Compacted depth
- Thickness or depth of the measured material. Measure only the layer being estimated and confirm the unit before entering.
- Supplier density (required for weight)
- Optional bulk density in the selected weight per volume unit. Ask for the bulk density of the specific aggregate and whether it represents loose delivery or placed material.
- Waste / allowance
- The percentage you choose to add for ordering. Price base gravel and surface gravel on separate lines, even if both layers cover the same driveway.
- Material price per purchase unit (USD)
- Optional price in USD per cubic yard of gravel. Use the quoted unit price before fees and taxes.
How is the estimate calculated?
Measured volume = sum of each rectangular area × finished layer depth. Adjusted volume = measured × (1 + allowance / 100). Optional mass = adjusted volume × entered bulk density.
Adjusted ft³ = sum of (section area ft² × depth in ÷ 12) × (1 + allowance ÷ 100). US short tons = adjusted ft³ × density lb/ft³ ÷ 2,000.
- A supplier density converts the entered volume basis to weight. The calculator does not apply a separate compaction factor.
What do you measure for the gravel calculator?
Record a finished depth for each layer. A driveway that has a base and a surface course needs two lines on the quote, even when both cover the same area. The layers can use different aggregates, and the supplier may sell one by volume and the other by weight. A combined volume is useful for checking arithmetic but cannot identify how much of each product to order.
How much gravel goes into a strip or larger area?
Narrow garden path
- 4 × 20 ft, 3 in deep
- Zero allowance, illustrative 100 lb per cu ft
- 4 × 20 = 80 sq ft.
- 80 × 3 ÷ 12 = 20 cu ft.
- 20 ÷ 27 ≈ 0.741 cu yd.
- 20 × 100 ÷ 2,000 = 1 US ton.
0.741 cu yd or an illustrative 1 US ton.
Check. 1 × 2,000 ÷ 100 = 20 cu ft.
Driveway base section
- 10 × 40 ft, 4 in deep
- 10% allowance, illustrative 95 lb per cu ft
- 10 × 40 × 4 ÷ 12 = 133⅓ cu ft.
- Multiply by 1.10 for 146⅔ cu ft.
- 146⅔ ÷ 27 ≈ 5.432 cu yd.
- 146⅔ × 95 ÷ 2,000 ≈ 6.967 US tons.
Compare the adjusted amount with the supplier’s selling increment.
Check. The unrounded tonnage converted back at 95 lb per cu ft gives 146⅔ cu ft.
How do layer depth and bulk density change the order?
| Depth | Volume per 100 sq ft |
|---|---|
| 2 in | 0.617 cu yd |
| 3 in | 0.926 cu yd |
| 4 in | 1.235 cu yd |
Measure each gravel layer independently. A driveway base and a surface layer may have different depths or materials. The calculated geometry describes the dimensions entered; it does not automatically convert a compacted layer into the loose quantity a truck delivers.
Should you order gravel by the cubic yard or ton?
Keep depth, compaction allowance and supplier density as separate entries. If a density represents loose delivery, ask whether the supplier has a separate conversion for the specified finished bed. Adding an arbitrary compaction percentage can double-count a delivery adjustment already built into the quote. Before you compare prices, confirm the ton means 2,000 lb in the quote.
Cubic yards measure volume; tons measure weight. Converting between them needs bulk density for the actual gravel and its condition. Crushed stone, pea gravel and other aggregates can differ. Ask the supplier whether the quoted density and sale unit refer to loose or compacted material.
Why might a delivered load cover a different area?
A flared drive mouth and passing bay can change the area. Divide them into rectangles and measure their depth separately when needed. Confirm how the truck can reach the drop point and how much the delivery service can unload. Call 811 before digging in the US.
Check the supplier’s gravel quote
- Ask whether the density describes loose delivered gravel or a compacted layer before converting yards to tons.
- Price base gravel and surface gravel on separate lines, even if both layers cover the same driveway.
Frequently asked questions
Should I order gravel by the yard or ton?
Match the supplier’s sale unit. Use cubic yards for a volume quote. For a ton quote, obtain bulk density for the actual aggregate and handling condition, then convert. Keep both units on the estimate so you can compare quotes without mixing up mass and volume.
Does the calculator compact gravel automatically?
It applies the allowance you enter. Ask the aggregate supplier or project designer how the specified finished depth relates to delivered loose material. Write down whether a quote already includes that adjustment before adding anything to your own estimate.
Can I estimate the base and top layer together?
Calculate each layer as its own order line. Use that layer’s depth, area and supplier density. You can add the volumes to understand the whole job, but the combined number is insufficient for ordering two different materials.
How do I compare delivery fees?
Multiply each order amount by its quoted unit price, then add delivery or minimum-order fees. Confirm the delivered quantity and where a truck can unload. For self-haul, compare the number of trips using the vehicle payload and your actual supplier weight.
How do I work out how much gravel I need?
Multiply the covered area by the chosen layer depth, keeping units consistent. Convert cubic feet to cubic yards by dividing by 27 and add any explicit ordering allowance.
How many tons are in a cubic yard of gravel?
There is no universal conversion. Multiply the volume by a supplier-provided bulk density and check whether the order uses US short tons or metric tonnes.
Sources and editorial details
CubicPilot Editorial Team. Last content review .
- General tables of units of measurement (NIST). Reference for US customary lengths, areas and volumes.
- Gravel Roads Construction and Maintenance Guide (Federal Highway Administration and South Dakota LTAP). Appendix A discusses finished layer thickness, moisture and compaction. Use your supplier’s product-specific bulk density for the weight estimate.